844.323.8388 Contact Us Mon-Sat 10a-6p
BUILD YOUR PASSION

Redline Select® 1997-2004 Chevrolet Corvette Control Arm Front Upper Right Hand

Redline Select® 1997-2004 Chevrolet Corvette Control Arm Front Upper Right Hand
$161.71$212.99 ea
NEWLOW STOCK ALERT!Only 1 Left in Stock
Model: 4919412
Select a Vehicle or refer to the Vehicle Fitment Tab below to verify that this part fits your vehicle.
STANDARD
DELIVERY
STORE PICKUP
[More Info]
Front upper right-hand control arm designed for 1997-2004 Chevrolet Corvette (C5). This suspension component locates the front wheel assembly, maintains proper camber and caster, and transmits loads between the chassis and steering knuckle. It replaces worn or damaged OEM arms to restore precise steering response, reduce uneven tire wear, and improve ride stability. Built for long-term durability and direct-fit installation, this control arm is an essential component for Corvette restoration, maintenance, or performance upkeep.
Features:
  • Fitment: 1997-2004 Chevrolet Corvette — Front Upper Right Hand (passenger side).
  • Direct-fit replacement designed to restore correct suspension geometry and steering response.
  • Constructed from heavy-duty steel with reinforced mounting points to resist bending and fatigue.
  • Includes factory-style bushings and ball joint interface to minimize vibration and maintain OEM ride characteristics.
  • Corrosion-resistant finish for extended service life in varied road conditions.
  • Ideal for restoration, collision repair, or upgrading worn suspension components to factory specifications.
Installation / Application:
  • Difficulty: 3/5
  • Estimated time: 60-120 minutes
Suggested Tools:
  • Floor jack and jack stands
  • Wheel chocks
  • Socket and ratchet set
  • Breaker bar
  • Torque wrench
  • Ball joint separator (pickle fork) or tie rod end puller
  • Pry bar
  • Penetrating oil
  • Hammer
  • Safety glasses and gloves
Instructions:
  1. Park vehicle on a level surface, engage parking brake, and chock rear wheels.
  2. Loosen front wheel lug nuts, then lift the front of the vehicle with a floor jack and support securely on jack stands.
  3. Remove the front wheel to access the suspension components.
  4. Apply penetrating oil to control arm mounting bolts, ball joint nut, and fasteners; allow time to soak.
  5. Remove the nut securing the upper ball joint to the steering knuckle. Use a ball joint separator or puller to separate the joint from the knuckle.
  6. Support the lower control arm or hub assembly to prevent sudden movement, then remove the bolts/nuts securing the upper control arm to the frame or subframe.
  7. Remove the old control arm from the vehicle and compare to the replacement to confirm correct orientation and parts.
  8. Install the new control arm into position and loosely install frame mounting bolts and nuts.
  9. Reconnect the upper ball joint to the steering knuckle and install the ball joint nut; tighten to the manufacturer’s specified torque.
  10. Torque all control arm mounting hardware to factory specifications with the suspension at the vehicle’s ride height if required (consult service manual).
  11. Reinstall the wheel, lower the vehicle, and torque the wheel lug nuts to spec.
  12. Perform a full alignment after installation to ensure correct camber, caster, and toe settings.
About Redline Select

Redline Restomotive® has established itself as a premier brand in the world of classic car restoration, providing enthusiasts with high-quality parts that meet the exacting standards of original manufacturer specifications. Dedicated to the preservation of American automotive history, Redline Restomotive® combines advanced manufacturing techniques with an in-depth understanding of vintage vehicles. The result is a range of products that seamlessly blend into the design and function of classic cars, giving restorers and collectors the assurance that each part reflects the era’s style, quality, and performance.

Redline Select®  is our premium line of steering and suspension products for all vehicle makes and models including both North American and Import vehicles.  We have partnered with an ISO 9001/QS9000/TS16949 certified manufacturing facility with more than 40 years of experience in producing components that perform to the standards our customers expect.  Our steering and suspension parts are backed by multiple quality control checks along the way—during production, prior to shipping from the factory, and at arrival. With our ISO 9001:2015 certification, we observe the world’s highest standards for quality management.  

Vehicle Fitment:

The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
Make Model Years
Chevrolet Corvette 1997 - 2004

Specifications:

Aftermarket Reference CMS501036, CB50175, 524-460, 524460, 2607480
OE Reference 10233617, 10333409, 10356438
Proposition 65 WARNING: This product may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm.

Reviews:

Write a Review
* Your Name:
* Email (This will not be displayed)
* Rating:
Comments:

Ask a question about

Redline Select® 1997-2004 Chevrolet Corvette Control Arm Front Upper Right Hand: