73-78 Corvettes from the factory had a round case muffler which can be seen below your rear valance or bumper. In 79-82 GM went back to an oval case muffler, similar to what was used in 63-72. This muffler tucked up under the car and was…
73-78 Corvettes from the factory had a round case muffler which can be seen below your rear valance or bumper. In 79-82 GM went back to an oval case muffler, similar to what was used in 63-72. This muffler tucked up under the car and was…
1974-197973-78 Corvettes from the factory had a round case muffler which can be seen below your rear valance or bumper. In 79-82 GM went back to an oval case muffler, similar to what was used in 63-72. This muffler tucked up under the car…
Set Includes:Experience the true power that is now hidden in your 1980-1982 Corvette with our true Dual Exhaust. Most Corvettes show a 20-30 horsepower gain when exhaust systems are changed to true dual exhaust system. Easy to install…
These 2.5" systems fits in the stock location with no modifications. The 1974-up systems are supplied with turn-downs similar to the stock muffler tips.The chambered sections give a deep, powerful side exhaust burble at idle and cruise…
1968-1972 2 1/2 Magnaflow muffler1968-1974 2 1/2 Auto intermediate pipe1968-1974 2--2 1/2 Auto SB front exhaust pipeMagnaFlow's Wide Open Performance Mufflers outflow OEM chamber style mufflers by as much as 167 percent. This reduces…
Lifetime Warranty, Dyno Tested And Proven To Make Power, Performance Gains In Horsepower And Torque, Great Sound -Has A Smooth; Deep Tone, Easy To Install, Mandrel-Bent. All Welded. Built To Last.
100% Stainless Steel…
MagnaFlow's Wide Open Performance Mufflers outflow OEM chamber style mufflers by as much as 167 percent. This reduces engine heat and backpressure and improves exhaust scavenging from the combustion chamber. MagnaFlow minimizes the power…
283/327/350 Tight Tuck Headers
323586 Aluminized Auto Front Pipe used with Headers
323520 Aluminized 2 1/2" Auto intermediate pipe
323416 2 1/2" Magnaflow mufflers
Note: Headers include Gaskets and Bolts. System doesnot include…
Made to fit exactly like the originals, our exhaust systems are made of long-lasting aluminized steel (65% Stainless Steel, 25% Aluminum, and 10% Carbon). Systems include the header pipe flanges, sleeves, donut gaskets, clamps and…
These 2.5" systems fits in the stock location with no modifications. The 1974-up systems are supplied with turn-downs similar to the stock muffler tips. The chambered sections give a deep, powerful side exhaust burble at idle and cruise…
My Account
