Unless your Corvette's cylinder shaft is bent or the shaft is missing chrome plating, this kit will rebuild your cylinder to like new.
This kit gives you all the needed parts to replace all the items at the end of the cylinder…
The rebuilt power steering control valve sends fluid to the power steering cylinder. Control valves can wear and, with their multiple fluid connections, leaks leaks are inevitable. Many control valves are replaced due to what appears to be…
Heavy Duty Idler Arm
Heavy-Duty Construction Reduces Steeing Deflection To Increase Tire Life
Greasable Pivots For Extended Wear
Used When Using Wider Tires Than Standard Sizes
…
Fits Late 1969-1982 Corvette
Remanufactured Steering Box
16:1 ratio
5 Year Manufacturer Warranty
These remanufactured steering boxes use the highest quality components - sector, recirculating ball worm and nut, bushing…
All The Pieces You Need To Reseal Your Own Pump
Corvette Power Steering Pump Kit Includes:
1 Shaft Seal
2 Mounting Stud Seals
1 Pump Body to Union Seal
1 Union "O"-Ring
1-Reservoir to Pump Body "O"-Ring
2-Pressure Plate…
This coupler (rag joint) is required to connect the steering column to the steering box.
Coupler Specs:
Shaft Size: 3/4" coarse spline with flat at bolt head side
Spline Count: 25
Total OD: 3-1/4"
Bolt Size: 5/16"
Bolt…
Great For Do-It-Yourselfer's
Allows You To Keep Original Casting
Includes Bearings & Races, Top Seal, Gasket, Recirculating Balls, Bushings, End Plug, Pitman Shaft Seal & Washers
For Use On Boxes WIth Or Without…
Each slave cylinder is stamped with a Quality Control stamp that tells date and remanufacturer. This stamp provides information for quality control and warranty issues. Rebuilt slave cylinders are cut open and new…
Direct Fit Replacement Product
No Vehicle Modifications Required
Power steering pump bracket and mounting kit. Includes cradle, adjusting bracket, and attaching bolts.
…
Ideal Replacement
Durable Construction
Quality Tested
This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.
…
Right Hand Thread
Sold as Each
Includes Grease Zerk, Castle Nut and Cotter Pin
Changing the Tie Rod End in your Corvette will eliminate some of the shimmy you get in the front end of your Corvette while driving down the…
Left Hand Thread
Sold as Each
Includes Grease Zerk, Castle Nut and Cotter Pin
Changing the Tie Rod End in your Corvette will eliminate some of the shimmy you get in the front end of your Corvette while driving down the…
2 Required
Reproduction of Original
Rear Outer Suspension Camber Control
Broken or worn 1984-1991 Rear Toe Adjustment Link Tie Rod Ends will cause a loose feel in rear suspension, replacing these will allow for proper…
Quality Remanufactured
Throughly Cleaned & Reconditioned Like New
Each Component Is Carefully Inspected & Replaced If Not Within OEM Tolerances
All Seals & O-Rings Are Replaced With OE Equivalent Parts
Each Unit Is…
My Account
