Securely fasten your hood stop or seat back bumper with this factory-correct bolt, designed for 1958-1991 models. This durable bolt ensures a reliable attachment, providing stability and preventing movement of the hood stop or seat back…
Protect your clutch system from dirt, debris, and moisture with this high-quality Clutch Fork / Bellhousing Boot, designed for 1955-1983 GM cars and trucks. This boot creates a tight seal around the clutch fork opening in the bellhousing…
Secure your window crank and lock knob in place with our Retaining Clip. Engineered for durability and precision fitment, this clip ensures your interior components remain securely attached, enhancing the functionality and aesthetics of…
Is your radio getting poor reception or no longer working for AM/FM stations due to a worn-out or broken power antenna in your vehicle? Replace it with this 31" (79cm) 5-section chrome power antenna so that you can enjoy clear radio…
Everyone enjoys cruising with their windows rolled down on a beautiful day, keep your Corvette’s windows operational with this Door Windsor Motor. This motor has an electrical connector with the terminal at a "T" pattern. If your harness…
These die-cast, ribbed, door lock knobs are heavy-duty die-cast reproductions of the original ribbed style door lock knobs found on a wide variety of GM models from 1968-90 including (but not limited to) the models listed below. Each set…
A prestigious sports car, the Chevrolet Corvette is seen by many enthusiasts as an example of premium American motoring. As is typically the case with other upscale, refined vehicles, many classic Corvettes feature high class amenities…
This coupler (rag joint) is required to connect the steering column to the steering box.
Coupler Specs:
Shaft Size: 3/4" coarse spline with flat at bolt head side
Spline Count: 25
Total OD: 3-1/4"
Bolt Size: 5/16"
Bolt…
Headlight Retaining Rings are a necessary safety item for correct installation of the headlights and proper night visibility. Driving with poorly installed or non-functioning headlights could prove catastrophic for you and other motorists…
Ensure secure attachment of your throttle rod or clutch linkage with this factory-correct retainer clip, designed for GM cars and trucks. This clip provides a precise fit and stable connection, preserving the original functionality of your…
Keeps your battery fully charged and maintained to extend battery life. Monitoring circuitry automatically turns charger on & off as needed. Fully protected against overcharging, short circuits, and reverse polarity. Features red/green…
The GM Car & Truck Floor Mount Headlight Dimmer Switch (12 Volt) is a factory-style replacement designed to restore proper high and low beam functionality in classic GM vehicles. Mounted on the driver-side floor, this 12V switch…
Improve throttle response and increase air velocity with this Throttle Body Air Foil for 1985–1996 Chevrolet Corvette models. Designed to smooth and direct airflow into the intake manifold, this high‑performance air foil reduces…
Optimize your GM car or truck’s hood alignment and reduce vibrations with our Outer Rear Hood Bumper Stopper, Rubber. Made from high-quality rubber, this essential component ensures a secure and cushioned closure for your hood…
Ensure reliable operation of your vehicle’s turn signals with this 20 Amp 2-terminal turn signal flasher. Designed for compatibility with a wide range of classic and modern vehicles, this flasher provides consistent performance for…
Ensure reliable tail light performance with this 3-wire tail lamp socket with pigtail, designed for GM cars and trucks. This high-quality socket provides a secure connection for tail lamps, maintaining proper functionality and…
Ensure accurate engine temperature readings with this factory-correct coolant temperature sending unit, designed for 1957-1978 GM cars and trucks. Featuring a mushroom head design, this high-quality sensor provides precise temperature…
Ensure your cooling system operates efficiently with this Vented Radiator Overflow Jar Cap. Designed to maintain proper pressure and allow for overflow venting, this cap is an essential component for preventing…
Wiper Blade Insert; Replacement; 16" Anco Style; Each OER reproduction Anco-style windshield wiper blade insert for various classic American vehicle models from the 1960's and up. These 16" wiper blades are manufactured from quality…
Repair torn and worn-out boots of suspension tie rod ends - without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5-point sealing action. Choose from four sizes and round or…
This plastic star shaped retainer/insulator snaps over the column upper shaft lock ring, snaps into tilt-telescopic column lock plate and covers hub attaching nut. It has to be installed with the reliefs right side up, or the retainer will…
Add the finishing touch to your classic restoration with this accurate reproduction of the Aqua GM Mark of Excellence Door Plate, designed for 1964-1967 GM cars and trucks. This emblem is a faithful recreation of the original, ensuring…
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully…
The EliteShield™ is an economy car cover made from a non-abrasive, spun-bond material that is thicker and stronger than other economy covers. The material is water repellent, breathable and UV treated for light outdoor use. There are…
1965-91 GM Truck; 1978-88 A/G-Body; Door Lock Knob; Chrome; Reproduction Reproduction of the interior lock knobs originally installed on most standard interiors for 1970-90 Chevrolet, Buick, Oldsmobile, and Pontiac models. Also correct…
OER® reproduction of the original molded rubber hood adjustment bumper located on the outer hood for 1982-02 models. This reproduction molded rubber bumper is manufactured to original specifications for an authentic fit and factory…
Product Features:
7 inch Steel round housing
Crystal clear glass lens
No prisims in the lens to block the light; an absolute clear lens
Plugs directly into stock harness
Replaceable bulb assembly
Fluted parabolic pattern on…
Improve your vehicle’s handling and stability with this premium stabilizer sway bar end link kit, designed for various 1958-2011 models. This kit includes all necessary components, including durable rubber bushings, to restore proper…
Upgrade your GM car or truck with our premium Inside Rear View Mirror Bracket Screw. Designed for perfect fit and durability, this essential accessory ensures secure mounting, offering peace of mind and optimal functionality. Shop now for…
This molded plastic grommet is an identical reproduction of original equipment and is designed to keep the accelerator cable from pulling through the pedal linkage. Sold per each, the grommet snaps into the accelerator pedal linkage and is…
Ensure proper hood alignment and prevent hood rattle with these Hood Stop Bolts with Nuts for 1964‑1973 GM Car & Truck models. Designed to replace worn, missing, or damaged hood stops, this set includes precision‑machined bolts and…
Add some bling to the underside of your car with Mr. Gasket's chrome differential cover. This chrome-plated steel cover is made to fit GM 10-bolt with 8 1/2 in ring gear. Is a complete kit with a gasket and bolts.
Features:
Made…