Underneath the stunning Mako Shark II-inspired body of the third generation Chevrolet Corvette, the sports car arrived from the factory with a host of engineering not only promoting speed and handling but also recognizing how the vehicle…
Our patented Side Post Battery Disconnect switch is designed to be used with General Motors style batteries with the connections on the side. A simple twist of a knob provides a convenient way to quickly disconnect and reconnect…
Ensure proper suspension function and reduce metal-to-metal contact with this high-quality Upper Control Arm Bumper, designed for 1949-1982 GM cars and trucks. This bumper absorbs impact and limits suspension travel, preventing damage to…
Most horn failures occur at the button due to broken horn contact buttons and contact brush insulators.
This kit contains these parts plus the horn contact, spacer and screws.
…
Wouldn't it be great to improve your nighttime vision 100%? Now you can by adding Halogen headlights to your Corvette. They're twice as bright as conventional headlights and allow you to see road hazards much earlier.
Makes…
Headlight Retaining Rings are a necessary safety item for correct installation of the headlights and proper night visibility. Driving with poorly installed or non-functioning headlights could prove catastrophic for you and other motorists…
Ensure secure attachment of your throttle rod or clutch linkage with this factory-correct retainer clip, designed for GM cars and trucks. This clip provides a precise fit and stable connection, preserving the original functionality of your…
Keeps your battery fully charged and maintained to extend battery life. Monitoring circuitry automatically turns charger on & off as needed. Fully protected against overcharging, short circuits, and reverse polarity. Features red/green…
Elevate your vehicle's visibility and style with our 7 Inch Round LED lights featuring Halo Daytime Running Lamps and Turn Signals. Experience enhanced safety on the road with powerful illumination and dynamic signaling. Crafted for…
The GM Car & Truck Floor Mount Headlight Dimmer Switch (12 Volt) is a factory-style replacement designed to restore proper high and low beam functionality in classic GM vehicles. Mounted on the driver-side floor, this 12V switch…
Maintain proper suspension function and prevent excessive wear with this high-quality Control Arm Upper and Lower Front Suspension Bumper Set, designed for 1963-1982 Chevrolet Corvette models. These bumpers absorb impact and limit…
Restore the functionality and appearance of your brake pedal with this high-quality Brake Pedal Pad, designed for 1966-1981 GM cars and Trucks equipped with an automatic transmission and drum brakes. This pedal pad provides a…
Optimize your GM car or truck’s hood alignment and reduce vibrations with our Outer Rear Hood Bumper Stopper, Rubber. Made from high-quality rubber, this essential component ensures a secure and cushioned closure for your hood…
Ensure reliable operation of your vehicle’s turn signals with this 20 Amp 2-terminal turn signal flasher. Designed for compatibility with a wide range of classic and modern vehicles, this flasher provides consistent performance for…
The CAGS system was created by to ease fuel consumption. It forces you to shift from 1st to 4th gear during slow acceleration. Thankfully, we have designed the CAGS 6 Speed Skip Shift Bypass to eliminate this nuisance. This…
OER® reproduction jar which holds the windshield washer fluid. This jar is for use on various GM vehicles.
Note:Washer jar cap sold separately.
Applications:
1967-69 Camaro
1963-70 Corvette
1962-69 Impala / full…
This 12-piece set of Phillips oval-head screws is perfect for various automotive restoration projects. Sized at #8 x 3/4", these screws provide a secure and reliable fastening solution for interior and exterior applications, offering…
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully…
OER's® revolutionary formula provides 40% more coverage than standard dyes and lacquers, and actually penetrates and molecularly bonds to the surface to permanently seal in the color. Dries to the touch in 45 seconds, forms a complete…
Most horn failures occur at the button due to broken horn contact buttons and contact brush insulators.
This kit contains these parts plus the horn contact, spacer and screws.
…
Maintain proper suspension function and prevent metal-to-metal contact with this high-quality Lower A-Arm / Control Arm Bumper, designed for 1963-1982 Chevrolet Corvette models. This bumper absorbs impact and limits suspension travel…
Upgrade your vehicle's lighting with this 2-piece set of 1156 LED light bulbs, featuring 9 miniature hyper white LEDs per bulb. These energy-efficient bulbs provide bright, reliable illumination, making them perfect for tail lights, brake…
Ensure your cooling system operates efficiently with this Vented Radiator Overflow Jar Cap. Designed to maintain proper pressure and allow for overflow venting, this cap is an essential component for preventing…
Add a touch of shine and durability with this set of #8 x 3/4" oval Phillips head screws, chrome-plated for a polished finish. Perfect for various automotive and restoration projects, these screws provide both functionality and aesthetic…
Wiper Blade Insert; Replacement; 16" Anco Style; Each OER reproduction Anco-style windshield wiper blade insert for various classic American vehicle models from the 1960's and up. These 16" wiper blades are manufactured from quality…
Keep your cooling system operating efficiently with this vented coolant recovery jar/overflow tank cap for 1976-1993 GM cars and trucks. Designed to provide a secure, leak-proof seal, this cap helps regulate coolant overflow and recovery…
Repair torn and worn-out boots of suspension tie rod ends - without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5-point sealing action. Choose from four sizes and round or…
The 1957-2002 GM Car & Truck 2.5" Exhaust Pipe Donut / Seal is a high-temperature gasket designed to ensure a tight, leak-proof connection between exhaust pipe flanges in classic and modern GM vehicles. Perfect for ball-and-socket or…
Secure your door access plates with this complete screw set, designed specifically for 1968-1982 Chevrolet Corvette models. These factory-correct screws provide a precise fit and stable attachment, maintaining the original appearance and…
These dust shields are held on to the inner skirts / fenders with a black plastic push retainer in 1969-1982, and with staples in early 1968. The A Arm dust shields are pliable fiber-reinforced black rubber. The lower flap is tucked…