Securely fasten your hood stop or seat back bumper with this factory-correct bolt, designed for 1958-1991 models. This durable bolt ensures a reliable attachment, providing stability and preventing movement of the hood stop or seat back…
Secure your window crank and lock knob in place with our Retaining Clip. Engineered for durability and precision fitment, this clip ensures your interior components remain securely attached, enhancing the functionality and aesthetics of…
Protect your clutch system from dirt, debris, and moisture with this high-quality Clutch Fork / Bellhousing Boot, designed for 1955-1983 GM cars and trucks. This boot creates a tight seal around the clutch fork opening in the bellhousing…
Is your radio getting poor reception or no longer working for AM/FM stations due to a worn-out or broken power antenna in your vehicle? Replace it with this 31" (79cm) 5-section chrome power antenna so that you can enjoy clear radio…
These die-cast, ribbed, door lock knobs are heavy-duty die-cast reproductions of the original ribbed style door lock knobs found on a wide variety of GM models from 1968-90 including (but not limited to) the models listed below. Each set…
This coupler (rag joint) is required to connect the steering column to the steering box.
Coupler Specs:
Shaft Size: 3/4" coarse spline with flat at bolt head side
Spline Count: 25
Total OD: 3-1/4"
Bolt Size: 5/16"
Bolt…
Headlight Retaining Rings are a necessary safety item for correct installation of the headlights and proper night visibility. Driving with poorly installed or non-functioning headlights could prove catastrophic for you and other motorists…
Ensure secure attachment of your throttle rod or clutch linkage with this factory-correct retainer clip, designed for GM cars and trucks. This clip provides a precise fit and stable connection, preserving the original functionality of your…
Ensure a leak-free and properly sealed braking system with this high-quality Brake Master Cylinder Cover Gasket, designed for 1967-1991 GM cars and trucks. This gasket forms a secure barrier between the master cylinder and its cover…
Keeps your battery fully charged and maintained to extend battery life. Monitoring circuitry automatically turns charger on & off as needed. Fully protected against overcharging, short circuits, and reverse polarity. Features red/green…
The GM Car & Truck Floor Mount Headlight Dimmer Switch (12 Volt) is a factory-style replacement designed to restore proper high and low beam functionality in classic GM vehicles. Mounted on the driver-side floor, this 12V switch…
O.E.M. style replacement
with washer switch located in dash
2nd design: 3 terminal connection located above wiper motor ground strap (does not include WINDSHIELD WASHER PUMP)
…
Improve throttle response and increase air velocity with this Throttle Body Air Foil for 1985–1996 Chevrolet Corvette models. Designed to smooth and direct airflow into the intake manifold, this high‑performance air foil reduces…
Optimize your GM car or truck’s hood alignment and reduce vibrations with our Outer Rear Hood Bumper Stopper, Rubber. Made from high-quality rubber, this essential component ensures a secure and cushioned closure for your hood…
Ensure reliable operation of your vehicle’s turn signals with this 20 Amp 2-terminal turn signal flasher. Designed for compatibility with a wide range of classic and modern vehicles, this flasher provides consistent performance for…
Ensure reliable tail light performance with this 3-wire tail lamp socket with pigtail, designed for GM cars and trucks. This high-quality socket provides a secure connection for tail lamps, maintaining proper functionality and…
This is the stud and bolt kit for Saginaw power steering pumps. Includes (2) studs (3/8"-16 thread), (1) bolt 3/8"-16 thread). Fits most Saginaw pumps through 1977 including Saginaw P series. This set is unplated for use with painted…
Ensure your cooling system operates efficiently with this Vented Radiator Overflow Jar Cap. Designed to maintain proper pressure and allow for overflow venting, this cap is an essential component for preventing…
Ensure accurate engine temperature readings with this factory-correct coolant temperature sending unit, designed for 1957-1978 GM cars and trucks. Featuring a mushroom head design, this high-quality sensor provides precise temperature…
This plastic star shaped retainer/insulator snaps over the column upper shaft lock ring, snaps into tilt-telescopic column lock plate and covers hub attaching nut. It has to be installed with the reliefs right side up, or the retainer will…
Wiper Blade Insert; Replacement; 16" Anco Style; Each
OER reproduction Anco-style windshield wiper blade insert for various classic American vehicle models from the 1960's and up. These 16" wiper blades are manufactured from quality…
Repair torn and worn-out boots of suspension tie rod ends - without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5-point sealing action. Choose from four sizes and round or…
Add the finishing touch to your classic restoration with this accurate reproduction of the Aqua GM Mark of Excellence Door Plate, designed for 1964-1967 GM cars and trucks. This emblem is a faithful recreation of the original, ensuring…
Engineered to meet or exceed OE specifications in fit, function and performance. Carefully manufactured from OE grade materials for strength and durability. Resistant to damage caused by corrosion and vibration.. Bolts, nuts and washers…
Windshield Wiper Blade; Trico 15" Length; Pair ; Classic Series
Reproduction of the original 15" "TRICO Style # PR-15-2W" wiper blades designed for us on a wide variety of classic vehicle models including, GM, Ford, Chrysler…
The Anco Style 15" Windshield Wiper Blades are designed to provide smooth, streak-free wiping performance for your classic car. Manufactured from high-quality rubber and featuring a durable frame, these wiper blades are built to…
Product Features:
7 inch round Thermal-heat resistant composite housing
Crystal clear glass lens
No prisms in the lens to block the light; an absolute clear lens
Plugs directly into stock harness
Replaceable bulb…
Upgrade your GM car or truck with our premium Inside Rear View Mirror Bracket Screw. Designed for perfect fit and durability, this essential accessory ensures secure mounting, offering peace of mind and optimal functionality. Shop now for…
Correct Reproduction of OE Style Wood Wheel Option Hub Adapter. This adapter comes Powder Coated Black finish. It will fit your 1969-89 GM Vehicle. Can be used with any VSW S6 Series Steering Wheels, & horn caps. Optional spacer for…
Product Features:
7 inch Steel round housing
Crystal clear glass lens
No prisims in the lens to block the light; an absolute clear lens
Plugs directly into stock harness
Replaceable bulb assembly
Fluted parabolic pattern on…
OER® reproduction of the original molded rubber hood adjustment bumper located on the outer hood for 1982-02 models. This reproduction molded rubber bumper is manufactured to original specifications for an authentic fit and factory…
Improve your vehicle’s handling and stability with this premium stabilizer sway bar end link kit, designed for various 1958-2011 models. This kit includes all necessary components, including durable rubber bushings, to restore proper…