92-95 Corvette: 350 LT-1 Tube Size 1.75" O.D., Collector Size 3" O.D., Collector Length 1.5", Port Shape: Same As Port; Black Paint; C.A.R.B. EO #D-164-5
Features:
- Tuned-length primary tubes for maximum exhaust scavenging and velocity
- 50-State Legal, C.A.R.B. E.O. #D-164-5
- Light weight & sturdy 16 gauge tubing
- 3/8” machined flanges for a perfect seal
- Industry’s best welds for durability
- Designed as a high-performance, direct fit replacement for factory exhaust manifolds
- Will accommodate all emission control devices
- All necessary hardware included for a complete installation
- Works with factory power steering, power brakes and air conditioning
- Legal for sale and installation in California
- CARB EXECUTIVE ORDER D-164-5
Will not fit with angle plug or raised port heads.
Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Please call Hooker tech service at 270-781-9741 for additional information regarding ceramic coated exhaust products. The use of header wraps can cause the header tubes to crack or rust due to excessive heat and moisture build-up. Hooker does not recommend the use of header wraps as this will void the warranty.
Installation Notes:
Will not fit with angle plug or raised port heads.
Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Please call Hooker tech service at 270-781-9741 for additional information regarding ceramic coated exhaust products. The use of header wraps can cause the header tubes to crack or rust due to excessive heat and moisture build-up. Hooker does not recommend the use of header wraps as this will void the warranty.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Years |
Engine |
Fitment Notes |
| Chevrolet |
Corvette |
1992 |
5.7L / 350 / V8 |
Street Force®; Emissions Compatible Header; Black Finish; Tube Size 1.75 in. OD; Collector Size 3 in. OD; Collector Length 1.5 in.; Port Shape Rectangle; |
| Chevrolet |
Corvette |
1993 |
5.7L / 350 / V8 |
Street Force®; Emissions Compatible Header; Black Finish; Tube Size 1.75 in. OD; Collector Size 3 in. OD; Collector Length 1.5 in.; Port Shape Rectangle; |
| Chevrolet |
Corvette |
1994 |
5.7L / 350 / V8 |
Street Force®; Emissions Compatible Header; Black Finish; Tube Size 1.75 in. OD; Collector Size 3 in. OD; Collector Length 1.5 in.; Port Shape Rectangle; |
| Chevrolet |
Corvette |
1995 |
5.7L / 350 / V8 |
Street Force®; Emissions Compatible Header; Black Finish; Tube Size 1.75 in. OD; Collector Size 3 in. OD; Collector Length 1.5 in.; Port Shape Rectangle; |
