No Vehicle Selected
Select Vehicle
Select Your Vehicle to Shop for the Correct Parts:
FlowTech 1963-1982 Chevrolet Corvette Long Tube Headers 31106FLT

FlowTech 1963-1982 Chevrolet Corvette Long Tube Headers 31106FLT

$418.99 ea
Model:1030417
No Discount / Limited Discount
Condition: NEW
Availability:
ARRIVING SOON!
Estimated arrival: 11/02/2021 (If Ordered Today)
Fitment:
Select a Vehicle or refer to the Vehicle Fitment Tab below to verify that this part fits your vehicle.
Shipping Note:Oversize 1
Qty:

Can't Find your Part?

We'll find it for you. Give us a call at 844.323.8388 and we'll source that discontinued or hard to find part.

Disclaimer

Motor City Corvette Parts always recommends professional installation of our products. Buyer assumes risk of damage caused by improper installation.

Flowtech headers are the perfect combination of performance and value. Flowtech long tube headers are precision engineered using mandrel bent tubing, formed collectors and 5/16" flanges with sealing rings for a leak-free seal. All mounting hardware and gaskets are included for a simple installation. This header is coated in a high heat and corrosion resistant metallic ceramic thermal coating that increases exhaust velocity and reduces underhood temps for increased performance.
Features:
  • Fuel Economy From The Engine
  • Leak Test For Max Performance
  • Ceramic Headers
  • Rust And Corrosion Resistance
  • Mandrel-Formed Power Plenum
  • Leak-proof O-Ringed Port Seals
  • Include All Mounting Hardware
Holley Performance Emission Code 4: This part is legal for sale or use on Racing Use Only Vehicles. The following vehicles are considered Racing Use Only Vehicles: Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street. WARNING: It is against the law to install this part on an Emissions Controlled Vehicle
Installation Notes:
Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Flowtech recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Please call Flowtech tech service at 270-781-9741 for additional information regarding ceramic coated exhaust products. The use of header wraps can cause the header tubes to crack or rust due to excessive heat and moisture build-up. Flowtech does not recommend the use of header wraps as this will void the warranty.
About FlowTech

No other brand offers more in the way of value performance exhaust systems for street and off?road applications than FlowTech.?

Downloads:

Download Name File Size
11106-3901fltrev.pdf300KB
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
Make Model Years Engine Fitment Notes
Chevrolet Corvette 1963 5.3L / 327 / V8 1.625 in. Primary Tubing; w/3 in. Collector; Mild Steel; Ceramic Coated;Intended For Race Use Only
Must Modify Stock Exhaust To Retain Cat. Converter~Req. A/C Bracket PN[10042FLT]
Chevrolet Corvette 1964 5.3L / 327 / V8 1.625 in. Primary Tubing; w/3 in. Collector; Mild Steel; Ceramic Coated;Intended For Race Use Only
Must Modify Stock Exhaust To Retain Cat. Converter~Req. A/C Bracket PN[10042FLT]
Chevrolet Corvette 1965 5.3L / 327 / V8 1.625 in. Primary Tubing; w/3 in. Collector; Mild Steel; Ceramic Coated;Intended For Race Use Only
Must Modify Stock Exhaust To Retain Cat. Converter~Req. A/C Bracket PN[10042FLT]
Chevrolet Corvette 1966 5.3L / 327 / V8 1.625 in. Primary Tubing; w/3 in. Collector; Mild Steel; Ceramic Coated;Intended For Race Use Only
Must Modify Stock Exhaust To Retain Cat. Converter~Req. A/C Bracket PN[10042FLT]
Chevrolet Corvette 1967 5.3L / 327 / V8 1.625 in. Primary Tubing; w/3 in. Collector; Mild Steel; Ceramic Coated;Intended For Race Use Only
Must Modify Stock Exhaust To Retain Cat. Converter~Req. A/C Bracket PN[10042FLT]
Chevrolet Corvette 1968 5.3L / 327 / V8
5.4L / 327 / V8
1.625 in. Primary Tubing; w/3 in. Collector; Mild Steel; Ceramic Coated;Intended For Race Use Only
Must Modify Stock Exhaust To Retain Cat. Converter~Req. A/C Bracket PN[10042FLT]
Chevrolet Corvette 1969 5.7L / 350 / V8 1.625 in. Primary Tubing; w/3 in. Collector; Mild Steel; Ceramic Coated;Intended For Race Use Only
Must Modify Stock Exhaust To Retain Cat. Converter~Req. A/C Bracket PN[10042FLT]
Chevrolet Corvette 1970 5.7L / 350 / V8 1.625 in. Primary Tubing; w/3 in. Collector; Mild Steel; Ceramic Coated;Intended For Race Use Only
Must Modify Stock Exhaust To Retain Cat. Converter~Req. A/C Bracket PN[10042FLT]
Chevrolet Corvette 1971 5.7L / 350 / V8 1.625 in. Primary Tubing; w/3 in. Collector; Mild Steel; Ceramic Coated;Intended For Race Use Only
Must Modify Stock Exhaust To Retain Cat. Converter~Req. A/C Bracket PN[10042FLT]
Chevrolet Corvette 1972 5.7L / 350 / V8 1.625 in. Primary Tubing; w/3 in. Collector; Mild Steel; Ceramic Coated;Intended For Race Use Only
Must Modify Stock Exhaust To Retain Cat. Converter~Req. A/C Bracket PN[10042FLT]
Chevrolet Corvette 1974 5.7L / 350 / V8 1.625 in. Primary Tubing; w/3 in. Collector; Mild Steel; Ceramic Coated;Intended For Race Use Only
Must Modify Stock Exhaust To Retain Cat. Converter~Req. A/C Bracket PN[10042FLT]
Chevrolet Corvette 1975 5.7L / 350 / V8 1.625 in. Primary Tubing; w/3 in. Collector; Mild Steel; Ceramic Coated;Intended For Race Use Only
Must Modify Stock Exhaust To Retain Cat. Converter~Req. A/C Bracket PN[10042FLT]
Chevrolet Corvette 1976 5.7L / 350 / V8 1.625 in. Primary Tubing; w/3 in. Collector; Mild Steel; Ceramic Coated;Intended For Race Use Only
Must Modify Stock Exhaust To Retain Cat. Converter~Req. A/C Bracket PN[10042FLT]
Chevrolet Corvette 1977 5.7L / 350 / V8 1.625 in. Primary Tubing; w/3 in. Collector; Mild Steel; Ceramic Coated;Intended For Race Use Only
Must Modify Stock Exhaust To Retain Cat. Converter~Req. A/C Bracket PN[10042FLT]
Chevrolet Corvette 1978 5.7L / 350 / V8 1.625 in. Primary Tubing; w/3 in. Collector; Mild Steel; Ceramic Coated;Intended For Race Use Only
Must Modify Stock Exhaust To Retain Cat. Converter~Req. A/C Bracket PN[10042FLT]
Chevrolet Corvette 1979 5.7L / 350 / V8 1.625 in. Primary Tubing; w/3 in. Collector; Mild Steel; Ceramic Coated;Intended For Race Use Only
Must Modify Stock Exhaust To Retain Cat. Converter~Req. A/C Bracket PN[10042FLT]
Chevrolet Corvette 1980 5.0L / 305 / V8
5.7L / 350 / V8
1.625 in. Primary Tubing; w/3 in. Collector; Mild Steel; Ceramic Coated;Intended For Race Use Only
Must Modify Stock Exhaust To Retain Cat. Converter~Req. A/C Bracket PN[10042FLT]
Chevrolet Corvette 1981 5.7L / 350 / V8 1.625 in. Primary Tubing; w/3 in. Collector; Mild Steel; Ceramic Coated;Intended For Race Use Only
Must Modify Stock Exhaust To Retain Cat. Converter~Req. A/C Bracket PN[10042FLT]
Chevrolet Corvette 1982 5.7L / 350 / V8 1.625 in. Primary Tubing; w/3 in. Collector; Mild Steel; Ceramic Coated;Intended For Race Use Only
Must Modify Stock Exhaust To Retain Cat. Converter~Req. A/C Bracket PN[10042FLT]
Application Automotive
Coated Finish Metallic Ceramic
Collector Diameter 3.000 in.
Collector Tube Size 3.000 in.
Emission Code 4
Engine Chevrolet Small Block Gen I
Engine Make/Size Chevy Small Block (262-400)
Header Finish Silver Ceramic
Header Style Long Tube
Material Mild Steel
Part Type Exhaust Header
Port Shape Round
Primary Tube Dia. 1-5/8 inch
Primary Tube Diameter 1.625 in.
Tube Diameter 1.625 in.
Tube Direction Down Swept
Tube Material Mild Steel
WARNING CA Proposition 65 WARNING: Cancer and Reproductive Harm

Write a Review

Your Name:

Your Review:

Note: HTML is not translated!

Rating: Bad Good

Ask a question about

FlowTech 1963-1982 Chevrolet Corvette Long Tube Headers 31106FLT:
Your Name:


Your Email:


Question: Note: HTML is not translated!

Related Products
Friendly Staff
Real-Time Inventory
Low Shipping Rates
www.motorcityvettes.com is owned and operated by Corvette Warehouse, LLC