This wire will replace both the resistance wire and starter solenoid-to-coil wire (to install a GM H.E.I. distributor, an ignition system crank/start resistance by-pass is required)…
Note: Connects to Dash Harness to bypass intermittent/pulse windshield wiper module OR See our new and improved INTERMITTENT/PULSE WINDSHIELD WIPER MODULE, part # 14016250…
Dash Harness to override switch located under steering column, adapter leads allow use of a 1970-72 switch (2 vertically mounted flat male-type terminals on switch), all with air conditioning…
with H.E.I. coil on distributor This harness will allow you to easily replace your mechanical cable driven tachometer with a 1975-77 electric tachometer without cutting or splicing any wiring. Does not include tachometer or tachometer…
Dash Harness to override switch located under steering column, adapter leads allow use of a 1970-72 switch (2 vertically mounted flat male-type terminals on switch), all without air conditioning…
Dash Harness to override switch located under steering column, adapter leads allow use of a 1970-72 switch (2 vertically mounted flat male-type terminals on switch…
Engine Harness to washer pump, adapter leads allow use of an original washer pump (round barrel-type terminals on pump) without the headlight washer solenoid…
headlight washer solenoid to washer pump, adapter leads allow use of a non-original washer pump (flat male-type terminals on pump) with the headlight washer solenoid…
with cannister type coil This harness will allow you to easily replace your mechanical cable driven tachometer with a 1975-77 electric tachometer without cutting or splicing any wiring. Does not include tachometer or tachometer filter…
Flaming River or 1969 & later GM column, with ignition switch on column, to wiring on stock Dash Harness for dash mounted ignition switch, Note: Adapts ignition switch on column to stock 1963-67 Dash Harness…
Flaming River or 1969 & later GM column, with ignition switch on column, to wiring on stock Dash Harness for dash mounted ignition switch, Note: Adapts ignition switch & ignition key warning buzzer (if present and functioning) on column to…
Dash Harness to power antenna switch connection, fused jumper harness allows you to add 15 amp fuse protection into this non-fused battery powered circuit.…
This harness will allow you to easily replace your clock with a 1981-82 oil temperature gauge and sending unit without cutting or splicing any wiring. Intended for use with, but does not include, the original style oil temperature gauge…
This harness will allow you to easily replace your clock with a 1981-82 oil temperature gauge and sending unit without cutting or splicing any wiring. Intended for use with, but does not include, the original style oil temperature gauge…