No Vehicle Selected
Select Vehicle
Select Your Vehicle to Shop for the Correct Parts:
Corvette Front Disc Brake Conversion Kit, 1963-1964

Corvette Front Disc Brake Conversion Kit, 1963-1964

$1,205.99
Model:1028894
Condition: NEW
Availability:
ARRIVING SOON!
Estimated arrival: 12/16/2020 (If Ordered Today)
Fitment:
Select a Vehicle or refer to the Vehicle Fitment Tab below to verify that this part fits your vehicle.
Shipping Note:Standard Delivery
Qty:

Can't Find your Part?

We'll find it for you. Give us a call at 844.323.8388 and we'll source that discontinued or hard to find part.

Disclaimer

Motor City Corvette Parts always recommends professional installation of our products. Buyer assumes risk of damage caused by improper installation.

If you want your drum brake Corvette to stop better with no pulling like drum brake cars do, than this is the kit for you. Completely transform your Corvette's braking system and performance with our complete Disc Brake Conversion Kit. We use original Delco parts. Why? Because a lot of this stuff is reproduced overseas with occasional poor quality control. Sometimes these reproduced parts are not road worthy. Examples of potential defective reproduced steering parts are the dimensions are wrong or the metal is not as strong as original GM stuff and the parts bend. We have seen reproduced spindles bend. Scary! You cant get this stuff new from GM, so what we do is hunt down the real deal- original Delco parts. It takes a lot of time to find this stuff but we think you are worth it. We do not sell parts that we would not put on our own cars! In the kit you get original Delco spindles, new dust shields, Delco spindle washers and nuts, Delco spindle assembly bolts, Delco tie rod brackets, Delco caliper brackets, Delco rotor hubs with new Timken bearings and races, grease seals & grease caps, new rotors, assembled Stainless Steel sleeved Delco calipers with O-Ring pistons and seals, disc brake pads, caliper hoses and caliper mounting bolts. You are getting everything between the upper and lower A-Frames for both left and right side.

 

  • 2Front Complete Spindles
  • 2Tie Rod Brackets
  • 2Dust Shields
  • 2Front O-Ring Type Piston Stainless Steel Sleeved Delco Corvette Calipers
  • 2Front Rotors
  • 4Caliper Mounting Bolts with Washers
  • 2Sets of Brake Pads
  • 2Front Bearing Hubs
  • 4Bearings with races 2-inner 2-outer
  • 2Hub Grease Seals
  • 2 Grease Cap
  • 2Rubber Brake Hoses
  • 2Brake Hose Clips

 

The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
Make Model Years
Chevrolet Corvette 1963 - 1964

Write a Review

Your Name:

Your Review:

Note: HTML is not translated!

Rating: Bad Good

Ask a question about

Corvette Front Disc Brake Conversion Kit, 1963-1964:
Your Name:


Your Email:


Question: Note: HTML is not translated!

Related Products
Friendly Staff
Real-Time Inventory
Low Shipping Rates
www.motorcityvettes.com is owned and operated by Corvette Warehouse, LLC