Suggested for drivers who rarely go over 6000 RPM
* The Ignitor generally can be powered by factory ignition resistance wires (no rewiring)
* The Ignitor can be used with OEM coils if they measure between 1.5-4.2 DC ohms
* The Ignitor Module may be damaged if the ignition switch is left in the "ON" position when engine is not running
* The Ignitor can be used to trigger multispark CD ignition boxes
* The Ignitor has a Lobe Sensor model that doesn't require distributor removal, but this Lobe Sensor model cannot be installed into dual-point distributors
* The original "Magnet Ring" model is still available but can require distributor removal if shims need to be added above the drive gear. Dual-point distributors require the magnet ring model
Includes:
271057 Pertronix Ignitor
302203 BB Flame Thrower Spark Plug Wires
301232 Chrome Flame Thrower Chrome Coil
SPARK PLUGS WIRES COILS
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Years |
| Chevrolet |
Corvette |
1965 - 1974 |
