Precision Fit - Heavily Reinforced Molds Adapted From Original GM Panels & Cured 24 Hours
Unequalled Finish - Finest Resins, 3 Layers Of 3.5 Oz Mat, 21 Mils Soft Sanding Gel Coat
Premium Quality - Our Hand Rolled Process Is Stronger & Free Of Bubbles & Waves
Superior Strength - Proper Reinforcements Provide Long Term Durability
Save Time & Money - Precision Trimming Minimizes Prep
/strong>
Made In The USA
NOTE:Fiberglass Panels Require Fitting, Trimming, Shimming, And Special Finishing. /strong><>As Well As Professional Fiberglass Prepping And Finishing DVD's - Volume 1 P/N 3190887, Volume 2 P/N 3255167. Our DVDs Are Loaded With Helpful Fiberglass Prepping And Finishing Tips That Will Help You Finish Your Project Right.
NOTE:This Part Does Not Fit An Actual ZR1 Body
At first glance, all aftermarket Corvette fiberglass body panels may look the same. During the 1980's and 1990's, several aftermarket companies tried reproducing replacement body panels for America's favorite sports car. However, many short cuts were taken to save costs. The end result were body panels full of air bubbles and waves. The amount of prep work required was time consuming and frustrating for body shops and expensive for consumers. Even worse, these fiberglass body panels didn't have reinforcements so long term durability was compromised. That may be fine for a race car but definitely not OK for a driver, show car, or investment.
The result is the finest quality fiberglass body panels that fit right the first time and with minimal prep work required. They are NOT built using a chopper gun as with cheaper imitations. 5ounces of mat and 21 mils of soft sanding gel coat. All of this eliminates hassles, frustrations, and disappointments while saving you valuable time and money.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.