NOTE:
Bedding-in new pads and rotors should be done carefully and slowly. Rapid heat build up in the brake system can lead to warped rotors and or glazed brake pads. Most brake pad compounds will take up to 300-400 miles to fully develop an even transfer film on the rotors. After installing new pads make 6 to 10 stops from approximately 35 mph with moderate pressure. Make an additional two to three hard stops from approximately 40 to 45 mph. Do not allow the vehicle to come to a complete stop.When completed with this process, park the vehicle and allow the brakes to cool completely before driving on them again. Do not engage the parking brake until after this cooling process is compete.
What's In The Box:
2 Rotors With Hats Pre-Installed, High Performance Pro Matrix Pads
Where It's Made:
USA
Manufacturer Limited Warranty:
None
Product Weight:
50 lbs.
Product Dimensions:
13" x 3"
Approx. Installation Time:
1-2 Hours
Experienced Mechanic Times Quoted, Yours Will Take Longer
Installation Difficulty:
Medium DIY
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.