SKF Racing performance hub for the front or rear of your C5 and C6 Corvette. SKF manufactures the hub unit for the ultimate track Corvette, the ZR1.
The SKF Corvette Racing Hub unit is designed to provide high stiffness during cornering, thereby, reducing piston knock-back and the need to trail brake. It is also designed for durability and to maintain preload at sustained loading of 1.2g! All this adds up to faster lap times and better driver feedback. If you have upgraded you Corvette's performance and/or use it in any form of competition, you need these SKF Hubs.
You gain increased stiffness for better brake performance under high loads, higher preloads. 10micron run-out and much increased durability. Under race and competitive use, you may go an entire season without replacement.
SKF = Svenska Kullager Fabriken - Swedish Bearing Manufacturer
SUSPENSION UPGRADE BEARINGS WHEELS VAN STEEL
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Years |
| Chevrolet |
Corvette |
1997 - 2008 |
